Addison Clear WaveHigh Performance Sealants, Adhesives and Coatings
High Performance Sealants, Adhesives and Coatings
Menu

Low Outgas Adhesives

ACW products listed below are low outgas adhesives as specified by MIL-STD 883/5011 and Telcordia GR-1221.

Product % wt loss Telco* % wt loss MIL-STD** Data Sheet
UV-Cure Epoxies
    A535-A    0.23    0.60   TDS
    A535-AN    0.13    0.19   TDS
    A535-AF2    0.02    0.04   TDS
    A535-XF    0.15    0.42   TDS
    A586    0.12    0.23   TDS
    A1432    0.16    0.18   TDS
    A1450    0.01    0.12   TDS
Dual-Cure Epoxies***
    A535-AT    0.01    0.05   TDS
    A539-DM    0.08    0.18   TDS
    A1708-A    0.01    0.05   TDS
    A1705-A    0.04    0.08   TDS
    A1702-A    0.03    0.08   TDS
    A1705-TX    0.01    0.03   TDS
    A1719-TX    0.07    0.41   TDS
    A1853-TX    0.03    0.22   TDS
    A1855-TX    0.10    0.51   TDS
    A1858-TX    0.03    0.35   TDS
    A1867-TX    0.05    0.33   TDS
    TCL202    0.07    0.11   TDS
    TCL203    0.06    0.11   TDS
    TCR1002    0.03    0.21   TDS
    TCR1003    0.06    0.09   TDS
Thermal Cure Epoxies
    TCL104    0.08    0.11   TDS
    TCL105    0.07    0.11   TDS

*Telcordia GR-1221, weight loss when heated from 50-150 °C at 5 °C/min, must be <0.1% for thermal cure or <0.25% for photo-cure.
** MIL-STD 883/5011, weight loss at 200 °C when heated at 10 or 20 °C/min from room temp under nitrogen flow, must be <1%.
*** photo-cured with thermal post cure.
The data in this table represents ACW’s measured values, but it does not constitute specifications.